Surface
Start with the surface treatment of the product: The product made from a good plate has a very smooth surface, and it is very smooth with electroplating. Products made from poor plates are bumpy, even if they are electroplated for several layers, because electroplating will not fill the product surface defects. Some will have small bubbles or yellowing and other problems. These are the performance of defective products.
Edge and inside
Start from the edges and the inside of the product: Good products are produced with burrs, so that the products will not be scratched or unsightly; even the best molds are used for a long time to make products that will generate burrs, so they must be treated; Inferior products are directly assembled without surface treatment, which can save a part of the cost, and it will be scratched or difficult to open when used. This is called cutting corners.
Material thickness
Start with the thickness of the product material: People often see that good products have thick materials and use them for a long time, while poor products are thin and cheap, and they will break after a long time. The same is true for buckles. Good products have thick materials, strong stress, more use times, and long life. Poor product materials are weaker when they are thin, so they will be deformed and easily damaged, have fewer uses, and have a short life.
Accessories assembly
Start with the assembly technology of the various parts of the product: the quality of the product, the long and short life span, and the assembly technology has a lot to do with the assembled parts. When a good product is assembled, the details of each activity are quite flexible. The rivets and springs are all made according to the size standards of the product. Poor products are assembled either too tightly or too loosely, and the gap is too large. The rivets and springs are also non-standard, which will reduce the quality and life of the product.
Intrinsic quality
Start with the internal quality of the product: Good products do not need fancy external packaging. Durable packaging is a common method used by many manufacturers to deceive consumers. Only a good product can stand the test of time.
